Aritech ATS3000 Betriebsanweisung PDF herunterladen (Seite 31)

ATS2000/3000/4000/4500 Manager’s Guide

6. TEST REPORT

Use this function to display the results of the Disarm Test or Arm Test.

Disarm test report: The test results to see if specific zones and cameras are

operating correctly. The zones need to be programmed to

be included in the test, and operate when areas are

disarmed. All cameras are tested.

The results of the camera tests are only displayed if the

user doing the disarm test has been programmed to test

cameras. Also, Area 1 must be assigned to this user’s

Alarm Group when the user is testing Area 1.

Arm test report: The test results to see if specific zones are operating

correctly. The zones need to be programmed to be

included in the test, and operate when areas are armed.

 Where a zone is displayed as untested, it could mean that it has not been tested

because it was missed, or because it was faulty and could not be tested.

To display the results of a test

1. Access menu option 6.

The display shows:

2. Select the test report you want by pressing:

1 [ENTER] for Disarm Test, or

2 [ENTER] for Arm Test, or

[ENTER] to return to the menu.

3. What happens next depends on which option you chose and whether there are

untested zones/cameras:

• Disarm test: (Zone test report is shown first.)

Test Report: 1-Disarm 2- Arm

Option:

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 70 71

Keine Kommentare

Aritech ATS3000 Betriebsanweisung Seite 31