Aritech ATS3000 Betriebsanweisung PDF herunterladen (Seite 8)

ATS2000/3000/4000/4500 Manager’s Guide

The area is unoccupied and armed.

OFF

The area is occupied and the security system has been set to

allow normal access.

BLINKING

An alarm has occurred in the area while the area was disarmed

(LED flashes slow) or armed (LED flashes fast)

System alarm LED’s: (available on some arming stations only)

The system alarm LED’s indicate a breach of security. One of the system alarm LED’s

flashes when an alarm has occurred (the area’s armed LED also flashes to indicate the

location of the alarm).

DISARMED alarm

Flashes when an alarm has occurred in an occupied area and

the area was disarmed.

24-HOUR alarm

Flashes when an alarm has occurred in an area where a zone

has been programmed for 24-hour alarm.

ARMED alarm

Flashes when an alarm has occurred in an armed area.

TAMPER alarm

Flashes when an alarm has occurred due to tamper.

System faults: (available on some arming stations only)

System faults are displayed on the arming station keypads if the arming station has an

LCD fitted and/or "System faults" LED’s.

Comms Fail

When there is a failure in the communications between THE

Advisor MASTER control panel and a central station.

RAS Fail

When a remote arming station is off-line.

DGP Fail

When a data gathering panel is off-line.

Battery Fail

When the auxiliary battery power is found to be low.

Trouble

Indicates a trouble in the system (RAS fail, low battery, etc).

USER IDENTIFICATION

All users of the Advisor MASTER system need PIN codes and/or cards. The PIN code

has between four and nine digits and is unique for each user. It is a combination of

numbers between 0 and 9.

The PIN code is programmed to let a user do specific tasks, such as arm or disarm the

system. The following three features are used to group functions together and

consequently determine which functions a user can access.

The Advisor MASTER system combines options for alarm and access control. Alarm

control provides options to monitor zones and determine if an alarm should occur when

an intruder is detected (depending if the area the zone is assigned to is armed or

disarmed). Access control provides options to monitor and control access to (parts) of the

premises.

Alarm groups:

Alarm groups contain options available to control the alarm system and perform functions.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

Aritech ATS3000 Betriebsanweisung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Aritech ATS3000